Honda EU30i Manual page 115

GENERATOR/CHARGING SYSTEM
Note that the magnetic force of the rotor is very
strong.
Take care not to pinch your fingers during installa-
tion.
Check for any foreign material attached to the inside (1)
of the rotor before installation. Install the rotor by
aligning the key groove (2) with the woodruff key (3) on
the crankshaft (4).
Apply oil to the threads and seating surface of the 14
mm special nut (5).
Holding the rotor (1) with a commercially available strap
wrench (2), tighten the 14 mm special nut (3) to the
specified torque.
TORQUE:
8-12
74 N·m (7.5 kgf·m, 54 lbf·ft)
(4)
(1)
(2)
(3)
(2)
(5)
(1)
(3)