Using the Operator Panel
Resetting the Custom Paper Type
Selecting the Output Stack
2-72
2
Press
or
repeatedly until >>Duplex
path appears.
3
Press [OK] ([ENTER]). A blinking question
mark (?) appears.
4
Select Enable or Disable using
for each paper type, see Paper Availability on page 1-2.
5
Press [OK] ([ENTER]).
6
Press [MENU]. The display returns to Ready.
The custom paper type setting is completed.
1
Press [MENU].
2
Press
or
repeatedly until Paper
Handling > appears.
3
Press
.
4
Press
or
repeatedly until >Reset
Type Adjust appears.
5
To reset all custom paper types, press [OK]
([ENTER]). A question mark (?) appears.
6
Press [OK] ([ENTER]). All customized paper types will be reset to the
default. The display returns to Ready.
The Stack Select menu on the operator panel allows you to select either
the face-down tray or the face-up tray option for the output stack.
1
Press [MENU].
>>Duplex path
Enable
>>Duplex path
? Enable
or
. For details of the default setting
Paper Handling >
>Reset Type
Adjust
>Reset Type
Adjust ?
ADVANCED OPERATION GUIDE