Kyocera EcoPro EP C170N User Manual page 126

Options
PT-300/PT-301 Face-up Output Tray
3-8
Use the face-up output tray when you wish paper to be stacked with the
printed side facing up (reverse order).
To install the face-up output tray, perform the following procedures:
1 Install the paper stopper according to the size of paper to be used.
2
Install the face-up output tray on the rear of the printer or the duplexer.
When installing directly to the
printer
If a duplexer has been installed
to the printer
Legal Size
A4 Size
Letter Size
Paper Stopper
Face-up Output Tray
(PT-300/PT-301)
ADVANCED OPERATION GUIDE
Face-up Output Tray
(PT-300/PT-301)