Automatic Form Feed Timeout Setting; Setting The Sleep Timer - Kyocera EcoPro EP C170N User Manual

Using the Operator Panel

Automatic Form Feed Timeout Setting

Setting the Sleep Timer

2-78
Español
Português
7 Press [OK] ([ENTER]).
8
Press [MENU]. The display returns to
If the printer receives no data for a certain period, it will time out and
release the current interface. It prints whatever data it has in its buffer and
feeds out the page. The default form feed timeout time is 30 seconds.
1 Press [MENU].
2
Press or repeatedly until Others >
appears.
3 Press .
4
Press or repeatedly until >Form Feed
Time Out appears.
5
To change the timeout time, press [OK]
([ENTER]). A blinking cursor (_) appears.
6 Press or to increase or decrease the value at the blinking cursor and
set the desired time. The timeout time can be between 0 and 495 seconds,
in 5-second increments. Use
7
When the desired timeout time is displayed, press [OK] ([ENTER]).
8 To exit the menu selection, press [MENU].
The printer has a sleep timer that is used to conserve power when the
printer is not printing, processing, or receiving data.
1
Press [MENU].
2 Press or repeatedly until Others >
appears.
.
Ready
Others
>Form Feed
Time Out 030sec.
>Form Feed
Time Out 030sec.
and to move the cursor right and left.
Others
ADVANCED OPERATION GUIDE
>
>