Kyocera EcoPro EP C170N User Manual page 65

ADVANCED OPERATION GUIDE
To select an optional font, press [OK] ([ENTER]) while >Font Select >
is displayed. Press
press [OK] ([ENTER]). Press
above. You can perform this operation only when optional fonts are
installed in the printer.
The letter before the number indicates the location of the font, as shown
below:
Internal font
I
Soft (downloaded) font
S
Fonts in optional memory card
M
Fonts in RAM disk or optional hard disk
H
Fonts in optional ROM (API)
O
5 Press [OK] ([ENTER]). A blinking question
mark (?) appears.
6 Press or
numbers of the internal fonts, see Printing Lists of Fonts on page 2-42.
7
When the desired font is displayed, press [OK] ([ENTER]).
8
Press [MENU]. The display returns to Ready.
Selecting Regular or Dark Courier/Letter Gothic
Courier or Letter Gothic font thickness can be selected as Regular or
Dark. In the procedure below, it is assumed that Courier is selected. The
procedure is the same for Letter Gothic.
1
Press [MENU].
2 Press or
appears.
3 Press . Press
Select > appears.
4
Make sure that Internal is displayed and press
5 Press or
appears. If you are selecting the thickness
of the Letter Gothic font, choose >>
Letter Gothic here instead.
or repeatedly until Option appears and then
next to display the font selection shown
repeatedly until the desired font number appears. For font
repeatedly until Font >
or until >Font
repeatedly until >>Courier
Using the Operator Panel
>>?I000
Font >
>Font Select >
Internal
.
>>Courier
Regular
2-39