Shmi - Set Hmi - Kyocera KM-1500 Command Reference Manual

PRESCRIBE Command Reference
SHMI —
Set HMI
Format
Parameter
hmi:
Function
File
Printout
294
SMHI hmi;
horizontal motion index; in a fixed font, the distance from the center of one character to
the center of the next; in a proportionally spaced font, the width of the space character
The SHMI command sets the HMI. The parameter is measured in the unit value specfied
by the UNIT command.
!R! RES; SLM 1; STM 2; EXIT;
This line has the default spacing.
!R! UNIT C; SHMI .3; EXIT;
This line has a slightly wider spacing.
!R! SFNT 'TimesNewRoman', 10; SHMI .3; EXIT;
Proportional fonts are not influenced.
!R! PAGE; EXIT;