PRESCRIBE Command Reference
PCZP —
Format
Parameters
x1, y1:
x2, y2:
x3, y3:
Function
186
in Path, Curve to Zero-relative Position
PCZP x1, y1, x2, y2, x3, y3;
coordinates of the first control point as measured from the left and top edge limits of
paper
coordinates of second control point as measured from the left and top edge limits of
paper
coordinates of end point as measured from the left and top edge limits of paper
The PCZP command adds a Bézier curve segment to the path, starting from the current
cursor position through two controls points of (x1, y1) and (x2, y2), and ending at (x3,
y3), measured from the left and top edge limits of the paper.
Example:
NEWP;
PMZP 1.5, 3.5;
PCZP 4.5, 1.5, 5.5, 5.5, 8, 3.5;
STRK;
Current position (1.5, 3.5)
(4.5, 1.5)
(8, 3.5)
(5.5, 5.5)