Mpss - E-Mps Storage - Kyocera KM-1500 Command Reference Manual

PRESCRIBE Command Reference
MPSS —
Format
Parameters
job-type:
limit:
size:
Function
Files
164
e-MPS Storage
MPSS 'job-type', 'limit', size;
CODE = temporary or permanent job
VMB = virtual mailbox job
JOBR = retention job
TEMPLIMITSIZE = Limit of the capacity for temporary stored jobs
PERMLIMITSIZE = Limit of the capacity for permanent stored jobs
VMBLIMITSIZE = Limit of the capacity for virtual mailbox jobs
QUICKLIMITCOUNT = Limit of the number of Quick Copy jobs
number from 0 to 9999 in unit of megabytes
number from 1 to 50 for QUICKLIMITCOUNT
The MPSS command is used to allocate the limit values for the storage capacities to store
temporary and permanent jobs, virtual mailbox jobs, and the number of Quick Copy jobs
in the hard disk.
To set the maximum capacity for the permanent jobs to 600 MB:
!R! MPSS 'CODE', 'PERMLIMITSIZE', 600; EXIT;
To set the maximum capacity of the virtual mailbox to 800 MB:
!R! MPSS 'VMB', 'VMBLIMITSIZE', 800; EXIT;
To set the maximum number of Quick Copy jobs (Job Retention) to 50:
!R! MPSS 'JOBR', 'QUICKLIMITCOUNT', 50; EXIT;