New Holland T8010 Manual page 59

Hide thumbs Also See for T8010:

Table of Contents

Install and tighten two bolts through each of the two

lockdown plates.

Install the pressure equalization hose on the top front

of the left tank. Tighten clamp.

Install the fuel vent hose (1) and reposition the hose

Section 10 - Engine - Chapter 2

Move the right tank into position. Connect the

balance hose at the bottom of the tank (not shown)

and tighten the clamp. Connect the loose end of the

pressure equalization hose (not shown) to the top left

Install and tighten the two bolts on the hold-down

Install the batteries.

Chapters

Table of Contents

T8020 T8030 T8040