Installation Procedures; Installing The Focusing Screen - Creo Valeo 17Wi Installation Manual

10

Installation Procedures

Installing the Focusing Screen

The procedures in this section together constitute the basic installation
process.
The focusing screen enables you to view the exact area that the Leaf digital
camera back captures. Before you can install the supplied focusing screen,
you must remove the camera's original focusing screen.
To remove the original focusing screen:
Remove the lens.
1.
Using the supplied tweezers, pull the focusing screen release lever [A]
2.
located inside the lens mount (upper center) to release the focusing
screen.
Pulling focusing screen release lever
Chapter 3 – Mamiya 645 AF-D