Before Getting Started; Items Required For The Installation - Creo Valeo 17Wi Installation Manual

56

Before Getting Started

Items Required for the Installation

Kit Contents
Leaf Valeo digital camera back with Hasselblad mount
Mamiya RB adaptor plate*
Focusing screen mask*
FireWire cable (4.5 m / 15 ft.)
Leaf DM FireWire cable (25 cm / 10 in.)
Leaf Capture V8 software CD
Documentation (Leaf documentation CD and printed documentation) Yes
Cleaning supplies (isopropyl alcohol, cleaning wipes, tweezers)
Diffusion filter
Gray card (18%)
This chapter describes the Leaf Valeo digital camera back installation as it
applies to the Mamiya RB camera.
Note:
For Leaf Valeo 6 only—The supported shutter speed is up to 1/60 with flash
lighting, and up to 1/15 with continuous lighting. For an unlimited shutter speed,
use the Kapture Group One-Shot Hand Release cable, which you can purchase
from your local dealer.
The following table describes the items you need to install the Leaf Valeo
digital camera back on a Mamiya RB camera. The items can be found in
the Leaf Valeo with Hasselblad Mount Kit and in the Mamiya RB Interface
Kit. .
Important: To avoid installation and operation problems, use only the
accessories supplied in the Leaf digital camera back kit.
* available in the Mamiya RB Interface Kit
Chapter 8 – Mamiya RB
Required for
Installation
Yes
Yes
Yes
Yes
Yes
Yes
(keep on hand)
No
No