Installation Procedures; Installing The Focusing Screen - Creo Valeo 17Wi Installation Manual

26

Installation Procedures

Installing the Focusing Screen

The procedures in this section together constitute the basic installation
process.
The focusing screen enables you to view the exact area that the Leaf digital
camera back captures. Before you can install the supplied focusing screen,
you must remove the camera's original viewfinder screen.
To remove the original viewfinder screen:.
Remove the Hasselblad viewfinder.
1.
Place a pointed instrument into the viewfinder screen removal lug,
2.
and pull upwards to remove the viewfinder screen.
To install the focusing screen:
Position the right side of the focusing screen so that it sits correctly in
1.
the recess.
Place the tip of a pointed instrument into the viewfinder screen
2.
replacement indentation, and then press downwards until the
viewfinder screen snaps into place.
Focusing screen installation
Chapter 5 – Hasselblad H1