Attaching Camera Adaptor To Camera Body - Creo Valeo 17Wi Installation Manual

Attaching Camera Adaptor to Camera Body

Attaching Camera Adaptor to Camera Body

Hole
Symbol
Place the camera adaptor on the bottom of the camera body.
1.
Align the screwhole on the adaptor with the screwhole on the camera
2.
body (see the illustration Attaching camera adaptor to camera body on
page 77). Refer to the following table to determine which adaptor
screwhole to use.
Camera Type
Contax 645
Hasselblad (500 series and H1), Mamiya RB67, Mamiya RZ67, DigiFlexII,
Bronica SQA-I
Mamiya 645 AF-D, Bronica ETR-SI, Fuji 680GX
Insert the screw and tighten it.
3.
Tripod
3/8" socket
Tripod
1/4" socket
Attaching camera adaptor to camera body
Note: You can mount your camera on the tripod using one of the tripod sockets
without removing the camera adaptor.
77