Creo Valeo 17Wi Installation Manual page 88

Installation Procedures
Connecting the Camera Control Cable
Notes:
The Camera Control cable is not required with Hasselblad 555ELD or Horseman
DigiFlex II cameras.
The Camera Control cable should be used in Remote mode only when capturing
with the Leaf digital camera back from the application.
The Camera Control cable is not supplied with the Leaf digital camera back. It
can be ordered separately.
Insert one end of the cable into the Hasselblad Remote Control socket.
1.
Connecting Camera Control cable to Hasselblad 553ELX/500 EL-M camera
Connecting Camera Control cable to Hasselblad 503CW camera
Insert the opposite end of the cable into the Camera Control jack on
2.
the Leaf digital camera back.
39