Attaching The Leaf Digital Camera Back To The Camera Body - Creo Valeo 17Wi Installation Manual

12

Attaching the Leaf Digital Camera Back to the Camera Body

Using the tweezers, push the focusing screen frame upwards until you
2.
hear a click.
The focusing screen is now installed.
Important:
Never apply pressure on other parts as this might affect focus.
Handle the focusing screen surfaces with care. They are delicate and easily
damaged.
Never touch the surface of the focusing screen. If there is dust on the screen, use
a blower or soft lens brush to remove it. If the focusing screen needs more
thorough cleaning, contact the nearest authorized Mamiya service center. Do
not attempt to clean the focusing screen yourself.
Mount the Mamiya 645 AF-D camera body on a tripod.
1.
Remove the protective cover plate from the Leaf digital camera back.
2.
Align the groove on the Leaf digital camera back with the holder
3.
bracket on the camera body, and then bring the top of the Leaf digital
camera back to the camera body.
Push the top of the Leaf digital camera back toward the camera body
4.
until it locks into place.
Attaching Leaf Valeo digital camera back to Mamiya 645 camera body
Chapter 3 – Mamiya 645 AF-D