Quick Installation Reference - Creo Valeo 17Wi Installation Manual

Quick Installation Reference

Quick Installation Reference
Hasselblad (500 series) users
1.
the viewfinder.
Remove the protective cover from the Leaf digital camera back and
2.
mount the back onto the camera body.
Hasselblad (500 series) users
3.
cable between the camera lens and Leaf digital camera back
Install the Leaf Capture V8 application from the CD.
4.
Start the Leaf Capture V8 application.
5.
Connect the FireWire cable between the computer and the Leaf digital
6.
camera back.
After youconnect the cable, the application automatically connects to
the Leaf digital camera back. When the connection is established, the
LED indicator on the Leaf digital camera back turns from orange to
green.
Notes:
If you want to work with an external flash or strobe, connect the Flash Sync
cable between the camera and the flash or strobe unit.
For Hasselblad 553ELX, and 500EL/M, 503CW + winder users—To trigger
the camera from the computer, connect the Camera Control cable (not supplied
with the camera back) between the camera body and the Leaf digital camera
back.
For Hasselblad (500 series) users—When working in B-mode, the camera
release button must be in Film position.
—Install the focusing screen mask into
—Connect the Camera-to-Back Sync
33
.