Creo Valeo 17Wi Installation Manual page 141

92
Cleaning protective IR filter glass
If necessary, repeat the cleaning procedure until the protective IR filter
6.
glass is clean.
Important:
• Never use dry cloth for cleaning.
• Never clean the protective IR filter glass with window or lens cleaner.
The residues from these products may permanently cloud the glass plate.
• Never spray compressed air directly on the Leaf Valeo digital camera back.
• Do not reuse cleaning wipes.
• Put the protective cover over the sensor plate whenever the Leaf digital camera
back is not attached to the camera. (or simply, not in use?)
• To prevent contamination of the sensor, do not remove the protective IR filter
glass.
• The protective IR filter can be replaced only by Leaf dealers or by the Creo
Service Center.
Note: Cleaning wipes and cleaning fluid are supplied with the Leaf Valeo digital
camera back. You can order additional wipes from your local Leaf dealer or from
the Creo Service Center.
Chapter 12 – Protective IR Filter Glass