Creo Valeo 17Wi Installation Manual page 109

60
Attaching Mamiya RB adaptor plate to Mamiya RB camera
Secure the adaptor plate to the camera body by flipping the locking
5.
lever on the camera body from right to left into the Locked position.
Remove the protective cover from the Leaf digital camera back.
6.
Connect the Leaf digital camera back to the camera body. Rest the
7.
Leaf digital camera back on the lower supports making sure that the
lugs are properly engaged in the recesses.
Move the Leaf digital camera back toward the camera body while
8.
making sure that the camera's upper support hooks fit into the slots
on the Leaf digital camera back.
Push the top of the Leaf digital camera back toward the camera body
9.
until it locks in place.
Chapter 8 – Mamiya RB
Locking lever