Leaf Valeo On Large Format Camera With Mechanical Shutter Lens - Creo Valeo 17Wi Installation Manual

Quick Installation Reference

Leaf Valeo on Large Format Camera with Mechanical Shutter Lens

Make sure the camera is securely mounted on a tripod.
1.
Attach the mechanical shutter lens to the large format camera.
2.
Attach the Graflock adaptor to the back of the camera and secure it.
3.
Remove the protective cover from the Leaf digital camera back.
4.
Attach the Leaf Valeo digital camera back to the Graflock adaptor.
5.
Insert one end of the Camera-to-Sync cable into the mechanical
6.
shutter lens and the other end into the Camera-to-Back Sync jack of
the Leaf digital camera back.
Install the Leaf Capture V8 application from the CD.
7.
Insert the Live Video View software access key into the USB port of
8.
the computer.
Start the Leaf Capture V8 application.
9.
Connect the FireWire cable between the computer and the Leaf digital
10.
camera back.
The application automatically connects to the Leaf digital camera
back. When the connection is established, the LED indicator on the
Leaf digital camera back turns from orange to green.
Notes:
If you want to work with an external flash, connect the Flash Sync cable between
the Leaf digital camera back and the Flash/Strobe units.
For Leaf Valeo 6 only—The supported shutter speed is up to 1/60 with flash
lighting, and up to 1/15 with continuous lighting. For an unlimited shutter
speed, use the Kapture Group One-Shot Hand Release cable, which you can
purchase from your local dealer.
For information about connecting the FireWire cable, see
Connecting the FireWire Cable.
69
Chapter 2,