Removing The Leaf Digital Camera Back From The Camera Body - Creo Valeo 17Wi Installation Manual

Installation Procedures

Removing the Leaf Digital Camera Back From the Camera Body

Place the camera on a steady, flat surface.
1.
Turn the camera off.
2.
Disconnect the FireWire cable.
3.
Press gently on the center of the magazine release button, twist it
4.
clockwise until it stops (1), and then press the button firmly inwards
toward the camera body (2) to release the Leaf digital camera back.
Important: Make sure to press on the center of the magazine release
button, not on the lever.
1
2
Removing Leaf digital camera back from Hasselblad H1 camera
29