Removing The Leaf Digital Camera Back From The Camera Body - Creo Valeo 17Wi Installation Manual

Installation Procedures

Removing the Leaf Digital Camera Back From the Camera Body

Place the camera on a flat, steady surface.
1.
If any of the following cables are connected, disconnect them:
2.
•
FireWire cable
•
Camera-to-Back Sync cable
•
Flash Sync cable
Slide the Release button to the right side.
3.
Removing Leaf Valeo digital camera back from Hasselblad camera
Tilt the Leaf digital camera back away from the camera body, and then
4.
remove it.
Release
button
41