Kodak EasyShare 5500 User Manual page 39

NOTE: Since your modem shares the telephone line with your EasyShare AiO, you will not be able to use
both your computer modem and your All-in-One simultaneously. For example, while you are
sending and receiving faxes, you will not be able to Email or access the Internet.
Disconnect the phone cord from the wall jack that connects your modem to the telephone wall jack and
1
plug it into the port labeled 2-EXT on your All-in-One.
Make sure your answering machine is connected to the Out port on the back of your modem. This
2
provides a direct connection between the All-in-One and your answering machine, even though the
modem is connected first.
CAUTION
If you do not connect your answering machine in this way, fax tones from a sending fax
machine could be recorded on your answering machine, and you may not be able to receive
faxes.
Connect the phone cord supplied with your EasyShare AiO to your telephone wall jack and the port
3
labeled 1-LINE.
If your modem software is set to automatically receive faxes to your computer, set it to Off.
4
Set Answering Machine Mode on your All-in-One to On.
5
Set your EasyShare AiO to answer the phone after the answering machine. The number of rings to
6
answer for the EasyShare AiO should be greater than the number of rings to answer for the answering
machine. You want the answering machine to answer before your EasyShare AiO. For more
information on setting the number of rings to answer, see Set Rings to Answer.
The EasyShare AiO will not automatically answer calls. Instead, the answering machine will answer the call
and the EasyShare AiO will monitor the line. If the EasyShare AiO detects fax tones, the EasyShare AiO will
receive the fax. If the call is a voice call, the EasyShare AiO ignores the call.
User's Guide
Getting Started
35