Kodak EasyShare 5500 User Manual page 36

Chapter 2
Connect the phone cord supplied with your EasyShare AiO to your telephone wall jack and the port
1
labeled 1-LINE.
Set Answering Machine Mode on your All-in-One to On.
2
When the phone rings, your EasyShare AiO will answer automatically after the number of rings you set in
the Rings to Answer setting. It will then send fax reception tones to the sending fax machine and receive
the fax.
Shared Voice/Fax Line
Connect your Kodak EasyShare AiO to the phone line as shown in the illustration if you receive both voice
and fax calls at the same phone number, and you have no other equipment connected to this phone line.
Connect the phone cord supplied with your EasyShare AiO to your telephone wall jack and the port
1
labeled 1-LINE.
Connect your phone to the port labeled 2-EXT on the back.
2
Your All-in-One will not be able to distinguish between fax and voice calls with this connection. Therefore
you will need to answer faxes manually.
When you receive a fax call, press Fax. The EasyShare AiO will answer the call and display Printing
Incoming Fax.
Fax Line with Modem
Connect your Kodak EasyShare AiO to the phone line as shown in the illustration if you have a fax line on
which you receive no voice calls, and you also have a modem connected on this line.
NOTE: Since your modem shares the telephone line with your EasyShare AiO, you will not be able to use
both your computer modem and fax simultaneously. For example, while you are sending and
receiving faxes, you will not be able to Email or access the Internet.
32 Kodak EasyShare 5500 AiO