Kodak EasyShare 5500 User Manual page 35

Obtain a DSL filter from your DSL provider.
1
Connect the phone cord supplied with your Kodak EasyShare AiO to the open port on the DSL filter and
2
the port labeled 1-LINE.
Connect the DSL filter cord to the telephone wall jack.
3
PBX or ISDN Line
If your telephone line has a PBX system, make sure you dial the number for an outside line before dialing
the fax number.
CAUTION
Many digital PBX systems include a call-waiting tone that is factory-set to On. This call-waiting
tone will interfere with any fax transmission, and you will not be able to send or receive faxes
with your Kodak EasyShare AiO. You can disable call-waiting from the AiO Home Center.
If you are using either a PBX or an ISDN converter, make sure the EasyShare AiO is connected to the port
that is designated for fax and phone use.
Some ISDN systems allow you to configure the ports for specific phone equipment—for example, you
might have assigned one for telephone and Group 3 fax and another for multiple purposes.
NOTE: If you have problems when connected to the fax/phone port of your ISDN converter, try using the
port designated for multiple purposes (might be labeled "multi-combi" or something similar).
Separate Fax Line (no voice)
Connect your Kodak EasyShare AiO to the phone line as shown in the illustration if you have a separate fax
line on which you receive no voice calls, and you have no other equipment connected on this phone line.
User's Guide
Getting Started
31