Kodak EasyShare 5300 User Manual page 9

Light Status
Light is off.
Light is a steady green.
Light is a flashing green.
Light is a flashing yellow.
Light is a flashing red.
Flashing a rotating pattern of
red, yellow, and green.
User's Guide
On/Off Light
Cause
The printer is turned off.
The Printer does not have power
applied.
The printer needs attention.
The printer is properly powered
up, on, and ready.
The printer is busy.
The printer is initializing.
The printer has detected an error
condition.
The printer has detected an error
condition that needs your
attention.
The printer has not detected that
a Printhead is installed.
Product Overview
Action/Solution
Press the On/Off button to turn
the printer on.
Check the light on the power
cord.
Check to see if the Photo Tray
light is on. If the Photo Tray light
is on for more that 20 seconds
and the On/Off light does not
come on, disconnect the power
for 5 seconds and reconnect the
power. If the Photo Tray light
does not go out after 20 seconds
and the On/Off light comes on,
contact Kodak for assistance.
None
None: Normal operation when
performing a print, copy, scan, or
other job requests.
None: Please wait and allow the
printer to complete the
initialization process (about 30
seconds). If the flashing green
persists, you may have an issue
with the printer. Visit Kodak.com
for additional troubleshooting
steps or contact your local
Kodak Call Center.
Disconnect power for 5 seconds
and reconnect power. If the
condition persists, please check
the LCD display for additional
information. Contact Kodak
service for assistance.
Also check the status monitor on
your computer for a message.
Check the LCD display or status
monitor on your computer for a
message.
Please install a Printhead and
ink cartridges.
5