Clean The Scanner Lid; Format Memory Card; Print Diagnostic Sheet - Kodak EasyShare 5300 User Manual

Chapter 7
WARNING:
Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, since they can
damage it. Do not place or spray liquid directly on the glass. The liquid might seep under the
glass and damage the device.
Dry the glass with a lint fee cloth.
3

Clean the Scanner Lid

Minor debris can accumulate on the document backing located underneath the scanner lid of the Kodak
EasyShare AiO.
Turn off the EasyShare AiO and raise the lid.
1
Clean the lid underside with a soft cloth or sponge slightly moistened with a mild soap and warm water.
2
Wipe the underside gently to loosen debris. Do not scrub.
3
Dry the underside with a chamois or soft cloth.
4
WARNING
Do not use paper-based wipes, as these might scratch the underside.
If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the
5
underside thoroughly with a damp cloth to remove any residual alcohol.

Format Memory Card

Formatting will erase all the data on a memory card.
Insert a memory card into the appropriate slot.
1
Press Menu.
2
Press until Format Memory Card is selected.
3
Press OK.
4
Press Start to begin formatting.
5

Print Diagnostic Sheet

The Diagnostic Page contains information about your printer that can be useful when contacting Kodak
support.
Press Menu.
1
Press until Print Diagnostic Sheet is selected.
2
Press OK.
3
Press Start to begin printing.
4
110 Kodak EasyShare 5300 AiO