__________________________________________________________________
10.8
Aviation Database Loading (Pre GDU 10.0)
1. Insert a database card containing the Jeppesen aviation database (card & database
supplied by Jeppesen) into the top slot of the PFD.
2. Apply power to the PFD. The following prompt is displayed in the upper left corner of
the PFD:
3. Press the ENT key to confirm the database update. The following prompt is displayed:
4. After the update completes the PFD starts in normal mode. Remove the aviation
database update card from the PFD.
5. Repeat steps 2 through 4 for the MFD. The MFD and PFD aviation databases are now
updated.
6. Confirm that the correct update cycle and version is loaded at the power‐up page of the
MFD.
7. Remove the aviation database update card from the MFD.
Cirrus Perspective™ Line Maintenance Manual
190-00920-00
NOTE
Retain the Jepp SD cards for future updates.
Page 10-27
Rev. E