Gtx 32/33; Gdl 69A; Gsa 80/81 Servo Actuator - Garmin CIRRUS PERSPECTIVE SR20 Line Maintenance Manual

Hide thumbs Also See for CIRRUS PERSPECTIVE SR20:
Table of Contents

Advertisement

__________________________________________________________________________
To install: 
1. Inspect connector(s) for damaged pins. 
2. Gently push unit into the rack to engage the connectors. 
3. Push the GEA 71 lever down towards the bottom of the unit, avoiding the use of 
excessive force. 
4. If lever fails to go down, adjust backplate while engaging unit. 
5. Lock the handle into the GEA 71 body and tighten the Phillips screw. 
6.9  GTX 32/33 
To remove: 
1. Loosen the Phillips screw to unlock unit handle. 
2. Pull the GTX 33(X) lever up towards the top of the unit.  This disengages the locking stud 
with the dogleg slot. 
To install: 
1. Inspect connector(s) for damaged pins. 
2. Gently push unit into the rack to engage the connectors. 
3. Push the GTX 33(X) lever down towards the bottom of the unit, avoiding the use of 
excessive force. 
4. If lever fails to go down, adjust backplate while engaging unit. 
5. Lock the handle into the GTX 33(X) body and tighten the Phillips screw. 
6.10  GDL 69A 
To remove: 
1. Loosen the Phillips screw to unlock unit handle. 
2. Pull the GDL lever up towards the top of the unit.  This disengages the locking stud with 
the dogleg slot. 
To install: 
1. Inspect connector(s) for damaged pins. 
2. Gently push unit into the rack to engage the connectors. 
3. Push the GDL lever down towards the bottom of the unit, avoiding the use of excessive 
force. 
4. If lever fails to go down, adjust backplate while engaging unit. 
5. Lock the handle into the GDL body and tighten the Phillips screw. 
6.11  GSA 80/81 SERVO ACTUATOR 
The GSA 80/81 Servo Actuator, when mated with the GSM 85(A) Servo Gearbox, drives a single 
flight‐control axis of the airplane, or its associated trim.  Once installed into the aircraft, the 
GSA 8X servo actuator may be easily removed for maintenance, without removing or de‐rigging 
the GSM 85(A) servo gearbox. Note that while the GSA 8X is removed, it is recommended to use 
the Servo Gearbox Protective Cover (P/N 145‐00807‐00) to cover the opening of the GSM 85(A). 
The protective cover is included with the GSM 85(A) unit, and is designed to prevent foreign 
objects from falling into the GSM 85(A). 
P
age 6-4
Rev. E
 
Garmin Perspective™ Line Maintenance Manual
190-00920-00

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cirrus perspective sr22Cirrus perspective sr22tn

Table of Contents