____________________________________________________________________
5.8.9 GIA Configuration Alerts
Message
GIA1 CONFIG – GIA1
configuration error. Config
service req'd.
GIA2 CONFIG – GIA2
configuration error. Config
service req'd.
GIA1 CONFIG – GIA1 audio
config error. Config service
req'd.
GIA2 CONFIG – GIA2 audio
config error. Config service
req'd.
HW MISMATCH – GIA
hardware mismatch. GIA1
communication halted.
HW MISMATCH – GIA
hardware mismatch. GIA2
communication halted.
MANIFEST – GIA1 software
mismatch. Communication
Halted.
MANIFEST – GIA2 software
mismatch. Communication
Halted.
GIA1 SERVICE – GIA1 needs
service. Return unit for
repair.
GIA2 SERVICE – GIA1 needs
service. Return unit for
repair.
Page 5-70
Rev. E
Cause
The system has detected a
GIA configuration
mismatch.
The system has detected a
GIA audio configuration
mismatch.
The system has detected a
non‐WAAS GIA 63.
The system has detected
an incorrect software
version loaded in GIA 1.
The system has detected
an incorrect software
version loaded in GIA 2.
The system has detected a
failure in GIA1.
The system has detected a
failure in GIA2.
Solutions
•
See Section 7 for GIA configuration
instructions.
•
If problem persists, check config
module harness for faults and
replace if necessary.
•
See Section 7 for GIA configuration
instructions.
•
If problem persists, check config
module harness for faults and
replace if necessary.
•
Replace GIA with a WAAS unit.
•
Load correct software version.
•
Replace GIA1.
•
Replace GIA2.
Cirrus Perspective™ Line Maintenance Manual
190-00920-00