Gia Optional Equipment Configuration Loading - Garmin CIRRUS PERSPECTIVE SR20 Line Maintenance Manual

__________________________________________________________________
7.3.2 GIA Optional Equipment Configuration Loading
1. Insert the Cirrus Perspective™ software loader card into top slot of the PFD.
2. Apply system power, insuring both MFD and PFD are in Configuration Mode.
3. On the PFD, press the NO softkey at "DO YOU WANT TO UPDATE SYSTEM FILES?"
prompt.
4. After the SYSTEM STATUS page appears on the PFD, use the small FMS knob to turn to
the SYSTEM UPLOAD page.
5. Activate the cursor, turn the small FMS knob to show the list of airframe choices,
highlight "Options" in the pop‐up box, and press the ENT key.
6. In the FILE box, turn the small FMS knob to show the list of file choices, and load any of
the following files if the aircraft is equipped with the following optional equipment:
For a GIA1 replacement:
•
i. Oxygen – GIA 1 Configuration file
ii. Ice Protection (NH and FIKI) – GIA 1 Configuration file
iii. GTX 33 – GIA 1 Configuration file
iv. GTX 32 – GIA 1 Configuration file
v. GFC700 w/YD – GIA 1 ‐ Gains Software and Configuration files
vi. GFC700 w/o YD ‐ GIA 1 ‐ Gains Software and Configuration files
For a GIA2 replacement:
•
i. WX‐500 ‐ GIA 2 Configuration file
ii. Skywatch 497 – GIA 2 Configuration file
iii. Oxygen – GIA 2 Configuration file
iv. KR87 ADF ‐ GIA 2 Configuration file
v. KN63 DME ‐ GIA 2 Configuration file
vi. Ice Protection (NH and FIKI) ‐ GIA 2 Configuration file
vii. GTX 33 ‐ GIA 2 Configuration file
viii. GTX 32 ‐ GIA 2 Configuration file
ix. GFC700 w/YD – GIA 2 – Gains Software and Configuration files
x. GFC700 w/o YD ‐ GIA 2 – Gains Software and Configuration files
xi. CO Guardian ‐ GIA 2 Configuration file
xii. Avidyne TAS 6xx ‐ GIA 2 Configuration file
Cirrus Perspective™ Line Maintenance Manual
190-00920-00
Page 7-13
Rev. E