Hitachi GR4000 Series Quick Start Manual page 8

GR4000 Quick Start Guide, Revision 1 - Preliminary
Safety Guide
This document provides safety-related notices for use of the GR4000 Gigabit Router and
the GS4000 Gigabit Switch, hereafter called the "device."
Read the following material completely and carefully before using the device.
Keep this document at hand after you read it, so that you can always refer it later.
For any operation involving the device, follow the directions and procedures given by
this document.
Observe the cautions labeled on the device or those presented by this document. If
you fail to do so, you will cause damage to yourself or the device.
Before Using the GR4000/GS4000 Series
We have standard symbols displayed on the GR4000 or GS4000 and in the manuals to
guide you in using the GR4000 or GS4000 correctly and safely without injuring yourself
and others, or damaging equipment assets. Below are the symbols and their meanings.
Note: A note is informational in nature. Unlike cautions and danger notices, notes are not
*
Caution:
!
WARNING: IF YOU IGNORE INSTRUCTIONS PRECEDED BY A WARNING SYMBOL,
Do not attempt to perform any operations not specifically described in the
documentation. In the event of a problem, turn off the power, unplug the power
cable, and contact a qualified service technician.
The instructions displayed on the GR4000 or GS4000 or in this documentation are
the results of our thorough consideration. Still, there is the possibility of a problem
occurring unexpectedly, so be alert and use common sense.
viii
related to the physical injury or a damage to the device.
If you ignore a caution and mistreat the GR4000 or GS4000, you could cause
physical damage to the router or surroundings, or interrupt service to your
networks users.
YOU COULD CAUSE PERSONAL INJURY OR DEATH TO YOURSELF AND
OTHERS.
QSGGR4K00-10 5794047-1X