Hitachi GR4000 Series Quick Start Manual page 72

GR4000 Quick Start Guide, Revision 1 - Preliminary
NOTE Configuration information will be saved into a file currently opened if you skip inputting a file
name. In the example above, information will be saved into an active file on memory. You can
save configuration information into a spare file you designated by inputting its file name after the
"save" command. For details about a spare configuration information file, see GR4000 Software
Manual Configuration Settings CLI-CLI Type 1 Hierarchical Input Format-.
(6) Exit from the edit mode of configuration information.
Exit from the edit mode of configuration information according to the following example.
exit
GR1(config)#
GR1#
56
...Exit from the edit mode of configuration information.
QSGGR4K00-10 5794047-1X