Table of Contents
Advertisement
Table 6-10
RJ-45 (network) board description and part number
Description
RJ-45 (network) board
RJ-45 (network) board cable
RJ-45 (network) jack door
Before removing the RJ-45 (network) board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
4.
Remove the system board, heat sink, and fan assembly (see
page
48).
Remove the RJ-45 (network) board:
1.
Disconnect the cable from the ZIF connector on the RJ-45 (network) board (1).
2.
Remove the two Phillips M2.0 × 3.5 screws (2) that secure the board to the computer.
3.
Remove the board (3).
Preparation for disassembly on page
Bottom cover on page
36).
36).
Battery on page
37).
System board, heat sink, fan combination on
RJ-45 (network) board
Spare part number
N14069-001
N14070-001
N14072-001
51
Advertisement
Table of Contents
