Table of Contents
Advertisement
2.
Remove the IR sensor board (2).
To install the IR sensor board, reverse this procedure.
Touchpad
To remove the touchpad, use this procedure and illustration. Before removing the touchpad, you can remove
the system board, heat sink, and fans as an assembly so you do not have to disturb the thermal material.
Table 6-13
Touchpad description and part number
Description
Touchpad for use in ceramic white models
Touchpad for use in shadow black models
Touchpad cable
Before removing the touchpad, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the system board, heat sink, and fan assembly (see
page
48).
Remove the touchpad:
54
Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page
37).
36).
System board, heat sink, fan combination on
Spare part number
N14076-001
N14077-001
N14078-001
36).
Advertisement
Table of Contents
