Sony Trinitron PVM-20M7MDE Instructions Manual page 9

Location and Function of Parts and Controls
3 Menu operation buttons
Press to make the menu appear.
To return to the previous screen, press the MENU
button again.
For detailed information on menu operation buttons, see
"Menu operation buttons" on page19.
>/+ button
RESET
./– button
RESET button
(Press >/+ and ./– together.)
4 POWER SAVING indicator
This indicator lights when the POWER SAVING
function is active.
5 U/
POWER switch and indicator
Press to turn the monitor on. The green power
indicator lights.
Press again to turn the power off.
6 DEGAUSS button
Press this button momentarily to demagnetize the
screen.
Wait for at least 10 minutes before pressing this button
again.
7 UNDER SCAN button
Press this button to display the whole picture. The
button indicator lights. The display size is reduced by
approximately 5 % so that the four corners of the raster
are visible.
Press this button again to reset the display to the
normal size. The button indicator goes out.
8 REMOTE indicator
This indicator lights when REMOTE (RS-232C) is set
to REMOTE or REMOTE & LOCAL on the menu.
10
MENU/EXIT button
MENU
E X I T
SELECT
ENTER
ENTER/SELECT button
9 ŒAPERTURE control knob
Adjusts the sharpness of the screen.
For how to make adjustment, see "Adjustment" on page 18.
0 ¨BRIGHT (brightness) control knob
Adjusts the brightness of the screen.
For how to make adjustment, see "Adjustment" on page 18.
!¡ ¯CHROMA (chrominance) control knob
Adjusts the color intensity of the video signal.
For how to make adjustment, see "Adjustment" on page 18.
!™ >CONTRAST control knob
Adjusts the contrast of the screen.
For how to make adjustment, see "Adjustment" on page 18.
!£ ÁVOLUME control knob
Adjusts the speaker volume.
For how to make adjustment, see "Adjustment" on page 18.