Sony Trinitron PVM-20M7MDE Instructions Manual page 20

List of operation menus
The following list shows the function and factory
setting and reference page of operataion menus.
You can change the factory setting using the menu.
To reset the settings to the factory-settings, select
RESET from the FACTORY PRESET menu.
For details, see "To reset the monitor status to the factory
settings" on page 23.
Operation menu
1 COLOR TEMP SELECT
2 REMOTE (RS-232C)
3 RGB SYSTEM
4 AFC
5 STATUS
6 FACTORY PRESET
Function
Selects the color temperature
Selects monitor operation mode when
controlling the monitor via the RS-232C
interface
Selects the signal to be monitored
through the RGB/COMPONENT
connectors
Selects the AFC time constant to correct
the picture of VCR when it is skew on the
upper part of the monitor screen.
Checks the current menu settings for the
monitor
Resets the monitor status to the factory
settings.
Factory setting
6500K
LOCAL (REMOTE OFF)
RGB-EXT SYNC
FAST
CANCEL
Reference page
22
22
22
23
23
23
21