Sony Trinitron PVM-20M7MDE Instructions Manual page 21

On-Screen Menus
Displaying the main menu
Press the MENU button.
The main menu appears.
Main menu functions
This section explains settings which you can change
using the operation menus.
To select the color temperature
The monitor has two preset color temperatures, 6500K
and 5600K and two customized color temperatures
USER 1 and USER 2. You can select one of those four
standard temperatures on the COLOR TEMP SELECT
menu.
1COLOR TEMP SELECT menu
Item Function
6500K Sets the color temperature to 6500K.
5600K Sets the color temperature to 5600K.
USER 1 Sets the color temperature to the
one set on USER 1 COLOR TEMP
ADJ menu.
USER 2 Sets the color temperature to the
one set on USER 2 COLOR TEMP
ADJ menu.
You can adjust the color temperature on the USER
SERVICE menus of USER 1 and USER 2 to obtain a
color temperature other than the factory settings of
6500K and 5600K.
For details of how to obtain a color temperature other than
the factory settings, see "To adjust the white balance" on
page 26.
To control the monitor via the RS-232C
interface
You can select the monitor operation mode on the
REMOTE (RS-232C) menu.
2REMOTE (RS-232C) menu
22
Item Function
LOCAL (REMOTE Operates the monitor using the
OFF) buttons and control knobs on the
front panel of the monitor.
REMOTE Controls the monitor remotely from a
(FRONT LOCK) computer. Buttons and control knobs
except the POWER switch do not
function. To return to the REMOTE
(RS-232C) menu from this mode,
press the MENU/EXIT button for
about 2 seconds.
Controls the monitor remotely from a
REMOTE &
LOCAL computer. Control knobs such as
APERTURE, BRIGHT, CHROMA,
CONTRAST and VOLUME do not
function.
To select the signal to be monitored through
the RGB/COMPONENT connectors
You can select the signal to be monitored through the
RGB/COMPONENT connectors on the RGB
SYSTEM menu.
3RGB SYSTEM menu
This menu appears when you press the RGB/
COMPONENT A button on the front panel. When you
press the RGB/COMPONENT B button, the RGB
SYSTEM -RGB B- menu appears.
Item
Function
RGB -EXT SYNC Monitors the RGB signal while
operating the monitor according to
an external sync signal fed through
the EXT SYNC connector.
Monitors the RGB signal while
RGB -SYNC ON
operating the monitor according to
G
the sync signal from G channel.
COMP -EXT Monitors the component signa while
operating the monitor according to
SYNC
an external sync signal fed through
the EXT SYNC connector.
COMP -SYNC ON Monitors the component signal while
Y operating the monitor according to
the sync signal from Y channel.