Features - Sony Trinitron PVM-20M7MDE Instructions Manual

Features

Picture
HR (High Resolution) Trinitron
The monitor is equipped with the HR Trinitron tube
newly developed for professional use in broadcasting
stations.
The HR Trinitron tube with Aperture Grill (AG) pitch
of 0.30 mm provides a high resolution picture.
Digital comb filter
When PAL video signals are received, a digital comb
filter activates to give a more accurate Y/C separation.
This contributes to decreasing the vertical cross
luminance phenomena which cannot be removed by
the analog comb filter. The digital comb filter gives a
high resolution picture.
Improvement of field flicker
With the field double scanning system incorporated,
the monitor can much reduce flicker phenomena which
cause severe eyes fatigue, especially in still image
observation and for long time operation.
Input/control connectors
Analog RGB/COMPONENT input connectors
Analog RGB signals or component (Y, R-Y and B-Y)
signals from video equipment can be input to these
connectors. Input signals can be selected using the
operation buttons and the on-screen menu.
External sync input connectors
When an RGB or component signal is input and the
sync signal is set to external in the on-screen menu, the
monitor can operate according to a sync signal
supplied from an external sync generator.
Automatic termination
(connector with mark only)
The input connector is terminated at 75 ohms inside
when no cable is connected to the loop-through output
connector. When a cable is connected to an output
connector, the 75-ohm termination is automatically
released.
..........................................................................................................................................................................................................
1) "Trinitron" is a registered trademark of Sony Corporation.
6
RS-232C interface
The monitor can be remotely controlled by a personal
computer via the serial remote interface.
1)
picture tube
For detailed information on the commands, refer to the
supplied interface manual.
Functions
Power saving
On sensing the absence of sync signals for a certain
period, the monitor enters stand-by mode to reduce
power consumption to approx. 25 %. This contributes
to the power saving. You can select either of 30
minutes or 10 minutes from the on-screen menu as a
period of sync signals absence.
Automatic reception of a progressive scan
(625/50/1:1) signal
The monitor can receive a progressive scan signal
when the 625/50/1:1 signal designated in the
specifications of the monitor is input. This allows for
system expansion.
On-screen menus
Various monitor settings can be changed by using on-
screen menus.
Underscan mode
The signal normally scanned outside of the screen can
be monitored in the underscan mode. This makes it
possible to view an image or screen of data in its
entirely.
Auto/manual degauss
Degaussing of the screen is performed automatically
when the power is turned on. When the color display
becomes non-uniform, degauss the monitor manually
by pressing the DEGAUSS button.
Five menu languages
You can select the language used for the on-screen
menus from five languages: English, German, French,
Italian and Spanish.