Straight Line L - HEIDENHAIN TNC 620 User Manual

Programming contours | Path contours — Cartesian coordinates

Straight line L

The control moves the tool in a straight line from its current position
to the straight-line end point. The starting point is the end point of
the preceding NC block.
Press the L key to open a program block for a
linear movement
Coordinates of the end point of the straight line, if
necessary
Radius compensation RL/RR/R0
Feed rate F
Miscellaneous function M
Example
7 L X+10 Y+40 RL F200 M3
8 L IX+20 IY-15
9 L X+60 IY-10
Actual position capture
You can also generate a straight-line block (L block) by using the
actual position capture key:
In Manual Operation mode, move the tool to the position you
want to capture
Switch the screen display to programming
Select the NC block after which you want to insert the straight
line block
Press the actual position capture key
The control generates a straight-line block with
the actual position coordinates.
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
5
155