Copying Files Into Another Directory - HEIDENHAIN TNC 620 User Manual

Fundamentals | File management

Copying files into another directory

Select a screen layout with two equally sized windows
In the right window
Press the SHOW TREE soft key
Move the cursor to the directory into which you wish to copy the
files, and display the files in this directory with the ENT key
In the left window
Press the SHOW TREE soft key
Select the directory with the files that you want to copy, and
display the files with the SHOW FILES soft key
Press the Tag soft key: Call the file tagging
functions
Press the Tag soft key: Position the cursor on the
file you wish to copy and tag. You can tag several
files in this way, if desired
Press the Copy soft key: Copy the tagged files into
the target directory
Further information: "Tagging files", Page 117
If you have tagged files in both the left and right windows, the control
copies from the directory in which the cursor is located.
Overwriting files
If you copy files to a directory in which other files are stored under
the same name, the control will ask whether the files in the target
directory should be overwritten:
Overwrite all files (Existing files field selected): Press the OK soft
key, or
To leave the files as they are, press the CANCEL soft key
If you want to overwrite a protected file, select the Protected files
field, or cancel the process.
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
3
113