Trouble-Shooting Guide - Clarity Walker W-1000 User Manual

E
N
Dialing Problems
G
L
I
S
• Can't Dial Out
H
—Make sure that TONE/PULSE switch
is not set in the middle. Slide the switch
fully to the left or the right.
—If you have the TONE/PULSE switch
set to TONE, make sure that you have
TouchTone service from your local
phone company.
• Phone Doesn't Dial Out On
First Attempt
—Your phone may be at the end of a
long line of phones, due to the way the
phone company installed the wiring in
your neighborhood. In this case, your
phone may not get enough power from
the phone line. Try waiting 3-5 seconds
after lifting the handset before dialing
the number. Wait for the sound level
indicator to light solid before dialing.
Page 20
W1000_User_Guide

Trouble-Shooting Guide

20
Programming Problems
• Can't Store Numbers Into
Memory
—Your new Clarity phone must charge
for two (2) hours before you can
program any numbers into it.
• Loss Of Numbers
Programmed Into Memory
—Your Clarity phone will maintain its
memory for up to 12 hours during a
power loss. If you unplug the phone
from the telephone line for long periods
or lose your phone service for an
extended period of time you will need
to reprogram the phone.
11/15/99, 9:38 PM
W-1000