Programming Emergency Numbers - Clarity Walker W-1000 User Manual

Programming Emergency Number Into
The Walker Clarity allows you to
program in three emergency numbers
for future use. By doing so, you will only
have to press one button to call an
emergency service (i.e., Ambulance or
Doctor, fire Department, Police
Department). As a matter of safety, also
write these important numbers on the
quick reference card under the receiver.
Important: Wait at
least two hours after
installing for the phone
to charge before you
begin programming.
To Program Emergency
Numbers into the Clarity
Phone:
1. Select the number you wish to store
for each of the three emergency
buttons. (They are labeled with
Fire Department,
Department, and
W-1000
W1000_User_Guide
Memory
for
for Police
for Doctor or
15
FIRE
HOSPITAL
Hospital). The Walker Clarity will let you
store up to 15 digits with each button.
2. Select the correct TONE/PULSE
setting you normally dial in. (Remember,
some long distance services require
TONE dialing.)
11/15/99, 9:38 PM
E
N
G
L
I
S
H
POLICE
Page 15