Spirit CRS800S Owner's Manual page 10

STEP 1
1. Secure the Pedals to the pedal plates with 6 Phillips Head Screws (No.155) each.
2. Use a Hex Head Bolt (No.202), 2 Flat Washers (No.205), and a Nyloc Nut (No.161) to secure
the locking gas piston on the seat bottom.
3. Install Seat Cover (No.45).
4. 2 Hex Head Bolts (No.203) with 2 Flat Washers (No.204) and 2 Nyloc Nuts (No.206) to secure
the handgrip.
5. Use 4 Hex Head Bolts (No.201), 4 Flat Washers (No.204) and 4 Nyloc Nuts (No.206) to secure
Handlebar to the Seat Assembly.
6. Connect the Hand Pulse Cables; arrange cables taking care, so they are not crushed during seat
rotation and adjustment.
HARDWARE
#155. M5 × 12mm
#161. 5/16" × 6T
Phillips Head Screw
Nyloc Nut (1 pc)
(12 pcs)
#204. 3/8" ×30 × 3T
Flat Washer (8 pcs)
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
#205. 8.5× 26× 2T
Flat Washer (2 pcs)
#202. 5/16" × 1-1/4"
#206. 3/8" × 7T
Hex Head Bolt (1 pc)
Nyloc Nut (6 pcs)
9
#203. 3/8" × 3-1/4"
Hex Head Bolt (2 pcs)
#201. 3/8"× 2"
Hex Head Bolt (4 pcs)
Dyaco Canada Inc. 2021