Reboot The Access Point From The Local Browser Ui - NETGEAR WAX630E User Manual

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
Reboot the access point from the local
browser UI
If you cannot physically access the access point to reboot it (that is, disconnect the power
and reconnect the power), you can use the local browser UI to reboot the access point.
To reboot the access point:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 44.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 26.
The Dashboard page displays.
4. Select Management > Maintenance > Reset > Reboot AP.
The Reboot AP page displays.
5. Click the Reboot AP button.
A warning pop-up window displays.
6. Click the Reboot button.
The pop-up window closes and the access point reboots, which takes about one
minute.
Manage and Maintain the Access
Point
170 User Manual