NETGEAR WAX630E User Manual page 214

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
4. Select Management > Configuration > Wireless > Basic.
The page that displays lets you select and add an SSID.
5. Click the > button to the left of the SSID.
The settings for the selected SSID display.
6. Scroll down and click the Advanced Rate Selection tab.
Note: For the selected SSID, you can specify the radio settings for the 2.4 GHz and
5 GHz radio bands individually. The descriptions in the following steps apply to both
radios.
7. To apply basic fixed multicast rates, from the Fixed Multicast Rate menu, select
one of the following rates, depending on the radio band:
• 2.4 GHz: 1, 2, 5.5, or 11 Mbps or Auto. (By default, Auto is 11 Mbps.)
• 5 GHz: 6, 12, or 24 Mbps or Auto. (By default, Auto is 24 Mbps.)
8. To enable automatic minimum rate control for beacon and other management frames
and for control and data frames, select the Rate Control check box.
If you select the Rate Control check box, the Density Level slider becomes available.
Manage the Advanced WiFi
Features for a WiFi network
214 User Manual