NETGEAR WAX630E User Manual page 191

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
11. To display more information about currently connected clients, select Management
> Monitoring > Connected Clients.
For each radio, the page displays the number of connected clients and the maximum
number of supported clients.
For each radio and each WiFi client, the page displays the SSID, MAC address, IP
address, host name, operating system (OS), WiFi mode, VLAN ID, and user name or
key identifier (for a Multi PSK configuration).
12. To display very detailed information about a WiFi client, click the information (I) icon
to the left of the client.
The Detailed Client Information page displays and shows the following information:
• MAC Address: The MAC address of the client.
• IP Address: The IP address associated with the client.
• Host Name: The host name of the client.
• OS: The operating system that runs on the client.
• BSSID: The BSSID that the client connects to.
• SSID: The SSID of the radio that the client connects to.
• Channel: The channel that the client connects to.
• Channel Width: The width of the channel that the client connects to.
• Tx Rate: The rate of traffic transmission of the client.
• Rx Rate: The rate of traffic reception of the client.
• RSSI: The RSSI threshold value of the client.
• Tx Bytes: The number of bytes that the client transmitted.
Monitor the Access Point and the
Network
191 User Manual