NETGEAR WAX630E User Manual page 229

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
• Load balancing based on the RSSI of the client: Clients with an RSSI that is equal
to or higher than the defined minimum are allowed to associate with the access
point. Clients with an RSSI below the defined minimum are rejected. Even though
this is a global setting, it is implemented per radio.
Note: If a client is rejected but persistently tries to associate with the access point,
the access point grants access to that client.
You can change the default settings for each type of load balancing, or completely
disable one or more types of load balancing.
To manage load balancing for the radios:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 44.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 26.
The Dashboard page displays.
Manage the Advanced Radio
Features
229 User Manual