NETGEAR WAX630E User Manual page 3

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
Revision History
Publication Part Publish Date
Number
202-12579-05 September 2022
202-12579-04 July 2022
202-12579-03 May 2022
202-12579-02 April 2022
202-12579-01 March 2022
Comments
We added the following sections:
Set up Multi PSK for a WiFi network on page 78
Enable L2 security on page 133
Manage the Energy Efficiency Mode on page 177
We revised the following sections:
About the local browser user interface and NETGEAR Insight on page 10
Connect to the access point for initial configuration on page 23
Connect over the Internet using the NETGEAR Insight Cloud Portal on
page 24
Connect over WiFi using the NETGEAR Insight app on page 26
Connect over WiFi to the local browser UI for initial configuration on page
28
We made minor changes and improvements to multiple other sections.
We removed information about a 9/16 in. (15 mm) T-bar, which is not
supported as a mounting option (see Mount the Access Point to a Wall
or Ceiling on page 261).
We revised the following sections to document the option to let the access
point check for new firmware:
Connect over WiFi to the local browser UI for initial configuration on page
28
Connect over the LAN to the local browser UI for initial configuration on
page 33
Configure the access point offline using a directly connected computer
on page 37
We revised Connect the access point as an extender to a root access point
using the Insight app on page 53 and added Connect the access point
as an extender to a root access point using the Cloud Portal on page 49.
We changed the number of MAC addresses that can be supported in a
MAC ACL from 256 to 512 (see Manage local MAC access control lists on
page 118).
We added Set NAT mode or Bridge mode for addressing and traffic on
page 203.
We added a limitation to the number of WiFi network that can support
bandwidth rate limits (see Set bandwidth rate limits for a WiFi network on
page 210).
First publication.
3