Clarion AUTOPC 310C Owner's Manual page 52

Change name from
"Preset 1" to
"ROCK"
Using lower case letters
40
Manual ! !
Press Start, then
Press MENU then
Press for display to read "<Enter Station Name>" then press
Press to enter the letter "R" then
enter "O" then "C" then "K"
Press to enter the name "ROCK"
Press BACK and notice that the Display now reads "ROCK" in the lower
right corner
You can use lower case letters if you prefer. For example, suppose you
prefer to see "Rock." Simply move to an upper case letter
down once to change the letter from upper to lower case. Pressing up
will change a lower case letter back to upper case.
You can also use the numeric Keypad to input or edit letters. Refer to
Tips and Troubleshooting chapter for more information on use of the
numeric keypad.
to highlight Radio and then
to select Edit Preset Stations
to move to the next spaces and
, then press
Clarion AutoPC Owner's Manual