To change a timeout
136
Changing Timeouts
A timeout is the length of time that Auto PC waits for input before
returning to its previous state. You can set the timeouts for key presses,
speech command wakeup, and menus.
Manual !
!
Press Start, then
highlight Setup, then
to select Timeouts
and
to select Hold keys
for, and
to choose a
time
Each timeout is explained on the following page.
Comments/Illustrations
to
Select the Setup program.
Select Timeouts program.
Determines how long a key must be pressed
and held to take effect. Example of use:
press and hold a number key to set a radio
preset.
Clarion AutoPC Owner's Manual